• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

DP2600e DP4800e

Status
Not open for further replies.
Joined
Jun 16, 2022
Messages
12


  • Hello, I'm looking for a dmr working as digital and analog mototrbo radio with digital display, where frequency and squelch codes can be set from the the display, without CPS, does dp 2600e or dp4800e is capable of doing that?


  • Thank you.
 

sammyg512

Member
Joined
May 4, 2024
Messages
30
From what i understand, all Motorbo Radios can only be programmed using the CPS. One work around i did, was creating a seperate channel zone, and adding each PMR frequancy, alongside its TPL code to a different channel on the radio. so in effect, i can use the radio in the same way, but i had to manually program it on the CPS with each frequancy setup first.
 
Joined
Jun 16, 2022
Messages
12
Thank you for the help.

I went with Hytera HP685 and 3000 mAh battery.

Testing it today at work.

I did something similar.

I set 5 zones, 4 with preset squelch codes, one without.

Radio allows to change parameters of the channel via LCD.

If anything I can modify squelch code in the fifth zone, leaving preset 4 zones untouched.
 
Status
Not open for further replies.
Top