DSD+ and RTLSHARP

[Merlin0130]

Hello,

I have a little problem with "dsd+" and rtlsharp ...

Here, I'm in southern France, and in the qra i receive mostly tetra scrambled and utility stations DMR in clair, with some, very interesting to listen to me. I only have one problem reception dmr, I have only one right reception channel stereo that works, not other. The reception is hatched on the left channel, and the right is normal according to the called channel. how to forcing please, the two channels in Mono reception on dsd + please? or my problem is in my setup configuration?

example: "TG=36" "Ch=3", I have a voice clear at right, and nothing on the left

"TG = 39" "Ch =4", I have a voice with cuts with one word out of two on the left and nothing on the right channel.

HELP HELP HELP

regards

 

[slicerwizard]

It sounds like you have DSD+'s audio output feeding back into DSD+'s audio input.

 

[Voyager]

If only one slot is talking, it will only be heard on one side (odd slots on the left and even slots on the right).

You still might have the loopback issue. Are you using a virtual cable such as VB Cable?

 

[Merlin0130]

hello slicerwizard and voyager

on this link, my setup configuration, ant i use VB audio cable

rtl-sdr.com • View topic - Trouble with DSD+ and sdrsharp

and thanks for the help

sorry for my english quality...

 

[Merlin0130]

hello slicerwizard and Voyager

i use VB audio cable yes, and on this link, my setup configuration...

rtl-sdr.com • View topic - Trouble with DSD+ and sdrsharp

with login: frenchswlyl

thanks

 

[Merlin0130]

and I noticed that on my decoding status window, there was indeed, untimely stoppages of déffilements the same time breaks on the oscilloscope, giving me a decoded voice hatched by the calling or called on canal my left speaker. And a voice and a clear and unambiguous decoding as appropriate, on the right speaker. It's really disheartening and annoying ... Sorry for my English, but this is a google translation ...

 

[slicerwizard]

SDR# volume level should be higher.

 

[Merlin0130]

he had to type in a Dos command window

dsdplus -i1M -o2M ...

the decoding works perfectly now ...