Link as in a link to the system in the database here. I can't tell you what steps you need to take until I can see what you are trying to listen to.
ok thanks ill try that im still just using the free version right now to so i dont have 1r.bat or fmp24 yet...does the free version trunk track ,, i am going to try getting a subscription to fastlane again but im just curious if the free one did itIf you are back to talking about DSDPlus, you can do trunktracking with a single dongle. What you will get with using two is the ability to retune to a talkgroup you have programmed to a higher priority.
With a P25 system, you should only have to tune to the Control Channel and the program will use the transmitted bandplan to tune the other channels. Open FMP24 and the 1R batch file that opens DSDPlus. They are easily customized via batch file editing or using the menu in the DSDPlus Event Log window.
chris
oh sorry just wasnt sure what you ment ,, Maritime Public Safety Radio Network (MPSRN) Trunking System, Various, Multi-State - Scanner Frequencies ,, trying to hear the cape breton ones this one being closest Boularderie Site Details (Maritime Public Safety Radio Network (MPSRN))And the link what do u mean ,, the listing on this site ? Like the control frequencies nac and what not ,, i seen it all come in on the dsd side but no trunking ,, so when I plug in that orange stick in what order do I open fmp ,, fmp , then the cc then the vc ? Or hows that work i should have the orange stick this week coming sometime
i got the orange stick its saying cant open sdr device what are the steps to get it goingI have some V3's as well. They're not as sensitive as the FlightAware dongles.
nope i have itt downloaded though what driver for the orange stickYou need to run Zadig and install the correct device driver. Have you done that?
ok so its open i hear static ,its saying no freq files found ,, i only have fmp opendYou need to run Zadig and install the correct device driver. Have you done that?
still dont seem like it wants to workrun FMP24
click on the FMP24 window
Type in the control channel frequency [enter]
make sure the bandwidth for p25 is either 12.5 or 9.5
put the noise floor around the second blue line up. [g] to go down [G] to go up
run DSDPlus via 1r.bat
should see system info start right away.
READ the Notes file.
chris
You have to tune it to a frequency to be able to hear something. Click on the FMP window and type in a known local frequency, or maybe a weather channel and you should hear something.ok so its open i hear static ,its saying no freq files found ,, i only have fmp opend
i am running fastlane now well trying toI thought you weren't using fast lane? If not, you should get it. Then run the FMP24-CC.bat file to start FMP24, then run 1R.bat to start DSD+.
FMP@$ is saying libfftw3f-3 is required whats thatI thought you weren't using fast lane? If not, you should get it. Then run the FMP24-CC.bat file to start FMP24, then run 1R.bat to start DSD+.
lines 17 thru 33 of Notes.txt said:If you are a new Fast Lane member:
If you already have a DSD+ 1.101 folder set up, skip step 1.
1: If you do not have a DSD+ folder set up yet, go to DSDPlus.com and download
the most recent public version of DSD+ (currently 1.101); also download the
DLL package.
Unzip all of the files to a folder on your PC. We recommend using C:\DSDPlus.
2: You should also download this file:
ftp://ftp.fftw.org/pub/fftw/fftw-3.3.5-dll32.zip
Extract the libfftw3f-3.dll file from the zipfile
(it is the largest file in the zipfile) and copy it to your DSD+ folder.