DSDPlus DSD FastLine 2.268 single receiver mode - No Audio

[deim]

Hi!

I have issue with DSD FastLine 2.268. No audio output on single receiver mode.
FMPA -rc -o20001 -L10 -M10 -V10 -b12.5 -f164.1875
DSDPlus -r1 -T -E -i20001 >>1Ra-log.txt

On version 2.256 this configuration decode audio without any problems.
If i am select Misc->Alert on All voice calls i hear beep on transmission start and see transmission on event log, but no decodec voice.
Output device selected correctly.
When get audio from SDR Sharp through virtual audio cable - voice decoded normally.
What could be the reason of this issue?

 

[cmjonesinc]

In the 'decoder' menu, try selecting 'Decoding Polarity Auto Detect'. I ran in to a similar issue when I updated the other day and that worked for me.

 

[deim]

In the 'decoder' menu, try selecting 'Decoding Polarity Auto Detect'. I ran in to a similar issue when I updated the other day and that worked for me.

this is not work for me. still silent...

 

[mtindor]

Make sure the following are set:

Output --> to your Speakers
Output --> Synthesize All Digital Voice

 

[deim]

Make sure the following are set:

Output --> to your Speakers
Output --> Synthesize All Digital Voice

I checked it twice.