DSDPlus DSD+FL alias issue

[cmjonesinc]

Running the latest update of fastlane monitoring a single DMR frequency. I've noticed that after several hours of monitoring the "ScrAlias" won't display on the activity monitor. The aliases still display in the log but not the activity monitor. I can close DSD out and restart it and they start working again but the alias will disappear again after several hours. Anyone else having this issue? Thanks in advance.

 

[slicerwizard]

Sounds like DSD+ thinks you've switched to a different system?

 

[cmjonesinc]

I'll look over the log some more and see if that's the case. Thanks for the suggestion.

 

[slicerwizard]

Give the system a name and see if DSD+ keeps displaying the name or drops it.

 

[cmjonesinc]

Forgot to mention that in my original post. It does have a name. The name drops as well from the activity monitor. Everything shows up as normal on the log. It's parked on a single DMR frequency and monitoring one TG on TS1 and one different TG on TS2. I would say 98% of the traffic is on TS1 but when the info drops from the monitor TS1 and TS2 both lose the channel alias and the radio alias on the activity monitor.

One other thing to possibly note.... When the system went online I took the first entry in the DSDplus.Radios file and copied and pasted it for about 50 different radio id's. I edited the id's to reflect the radio id and alias they were assigned to. I saved the dsdplus.radios file and everything worked as it should. I later noticed entries kept getting automatically deleted from the file. However, when the alias and channel disappear from the activity monitor I check the radios file and even the entries that are still in it aren't displaying on the monitor but they are on the log as previously mentioned. I can close DSD and open it back up and the ID's come back like normal but after a couple hours or so they disappear again. Currently I've got a bat file scheduled to run every hour to kill and restart DSD 1R but to leave FMP24 running and it's working alright. I just feel like something has to be wrong.

I understand the .radios file will be overwritten as new radios appear on the system but I don't understand why it's removing radios from the list.

Thanks again for the suggestions and help

 

[slicerwizard]

Just had DSD+ forget what conventional channel/site I was monitoring when I made an edit to the .networks file. Happens every time I save/write the file. Until I did that, it displayed the channel network ID and name, etc. for as long as I sat on the channel. Letting it sit for a few hours to see what it does.