Dsdplus-fl and Ham Radio

Status
Not open for further replies.

lviper

Member
Premium Subscriber
Joined
Feb 8, 2005
Messages
118
Location
SW Indiana
Is it possible to use a single (or dual) rtl-sdr with dsdplus-fl to monitor ham radio dmr and/or c4fm (fusion) digial repeaters?

I have tried setting fmp24 on the repeater's out frequency and running dsdplus with dmr selected. All I've ever gotten was what I believe is the station id every 10 minutes. I've never heard anything. Same for fusion repeaters but never even seen to station id broadcast.

So if it is possible, how to I set it up?
 

slicerwizard

Member
Joined
Sep 19, 2002
Messages
7,643
Location
Toronto, Ontario
You just park FMP24 on a repeater's output or scan multiple repeaters. In DSD+ FL, just enable all modes (DMR, Fusion, ...)

When voice is transmitted, you should hear it - unless you've messed with settings like Monitoring Threshold.
 

lviper

Member
Premium Subscriber
Joined
Feb 8, 2005
Messages
118
Location
SW Indiana
Thanks slicer. Guess the repeaters in my area are just quiet. I'll make a post in my state's forum to see if there are any local hams that can shed some light on who's using what and were. I'm trying to decide on a new ht with either dmr or fusion since those are the 2 digital repeaters in my area.
 
Status
Not open for further replies.
Top