• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

EDACS Group names transferable to P25 Groupset?

Status
Not open for further replies.

TDR-94

Member
Joined
Mar 30, 2014
Messages
1,271
I'm guessing there is no way to transfer/copy EDACS group names over to a P25 groupset,so they don't have to be entered from scratch all over again,correct?
 

TDR-94

Member
Joined
Mar 30, 2014
Messages
1,271
Does LCN order still apply with Harris P25 systems and do those systems still use transmission trunking?
 

DisasterGuy

Member
Joined
Aug 24, 2013
Messages
1,249
Location
Maryland Shore
Not sure why you would want to move the sets as the parameters change. P25 group sets get populated with multi group settings, sys ID settings etc that are not part of EDACS sets (assuming a system were to migrate with no change in GIDs).

While it is some work, so is fleet mapping in general. I am in the middle up forming our master personality under scratch build revision 3 right now. It comes with the job for system cutover.

As for trunking mode, either message or transmission trunking is available via UAS config.


Sent from my SM-G900V using Tapatalk
 

TDR-94

Member
Joined
Mar 30, 2014
Messages
1,271
The group names would remain the same as they currently are on the EDACS system.Coping just those over to the P25 group name settings would have been a real time saver.
 
Status
Not open for further replies.
Top