EDACS Standard for Pro95

Status
Not open for further replies.

FFAndy

Member
Joined
Jun 9, 2008
Messages
66
Location
Ohio
When I program EDACS Standard Freq's into my Pro95 I know you leave the first slot (000) empty. Do I have to lock that slot out? or change it from defalt FM To EDACS? NAd what does Primary and Alternate control Freq's mean?
 

gmclam

Member
Premium Subscriber
Joined
Sep 15, 2006
Messages
5,841
Location
Fair Oaks, CA
Pro-95

When I program EDACS Standard Freq's into my Pro95 I know you leave the first slot (000) empty. Do I have to lock that slot out?
No.

or change it from defalt FM To EDACS?
No.

NAd what does Primary and Alternate control Freq's mean?
The system is normally broadcasting control channel data on the primary frequency, but from time to time the control channel is switched to the alternate frequency.
 

N8IAA

Member
Joined
Dec 19, 2002
Messages
7,087
Location
Fortunately, GA
FFAndy, if you look in the database for the Washington DOT, there is somewhere in the middle of the page a list of VHF frequencies that rebroadcasts the LTR Multinet comms. You will not need to put in the multinet frequencies to hear the conversations. That will be your work around to hearing what's going on in the snowy NW;)
HTH,
Larry
 

rabidmoose57

Member
Joined
Jun 7, 2007
Messages
151
Location
Southeast Iowa.
It done logicly?

FFAndy,
Don't forget to input the freqs in the "logical channel number" order. My 95 works pretty well in the K.C. edacs jungle.
 
Status
Not open for further replies.
Top