• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

EF Johnson 5100 P25 Slow Squelch

Status
Not open for further replies.

jdarcy

Member
Joined
Jan 12, 2006
Messages
3
Hello

I have a new to me 5100 VHF version1 radio. I have noticed that when receiving on a p25 channel, the squelch seems slow to open. When compared to my Astro Saber, I often miss the first .25 to .50 seconds of a transmission. Can anyone advise me if this is normal or if there is a setting that may cause this. Once the squelch opens, everything seems fine, so I don't think it is a turning issue. Thanks for any suggestions.

JD
 

RFI-EMI-GUY

Member
Joined
Dec 22, 2013
Messages
6,859
Hello

I have a new to me 5100 VHF version1 radio. I have noticed that when receiving on a p25 channel, the squelch seems slow to open. When compared to my Astro Saber, I often miss the first .25 to .50 seconds of a transmission. Can anyone advise me if this is normal or if there is a setting that may cause this. Once the squelch opens, everything seems fine, so I don't think it is a turning issue. Thanks for any suggestions.

JD
Is the radio programmed for mixed mode? Mixed mode allows the radio to un mute in analog as well as digital p25. You might try programming the channel for p25 only .

Sent from my SM-T350 using Tapatalk damn you autocomplete
 
Status
Not open for further replies.
Top