• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Enabling the DTMF pad on the HT1250

Status
Not open for further replies.

Spankymedic7

Member
Joined
Mar 30, 2007
Messages
299
Location
Wisconsin
Hi to all,

I recently acquired the aforementioned ht, and a friend of mine programmed it for me. The one thing that neither of us could figure out is how to enable the DTMF pad. On my MTS 2000, we all know that there is a "hot key" box that can be checked, but we found no such option when programming the HT1250.

The model # is AAH25RDF9AA5AN. Any suggestions?

Thank you in advance!
 

druhe

Member
Feed Provider
Joined
Feb 18, 2003
Messages
589
Location
Southwest Pa
Hi to all,

I recently acquired the aforementioned ht, and a friend of mine programmed it for me. The one thing that neither of us could figure out is how to enable the DTMF pad. On my MTS 2000, we all know that there is a "hot key" box that can be checked, but we found no such option when programming the HT1250.

The model # is AAH25RDF9AA5AN. Any suggestions?

Thank you in advance!
In CPS look under RADIO CONFIGURATION>BASIC, the Hot Keypad should be checked. I'm almost certain that should do it
 
Status
Not open for further replies.
Top