BCD996P2: finding time slot and talk groups on DMR frequency

Status
Not open for further replies.

UPMan

Uniden Representative
Premium Subscriber
Joined
Apr 19, 2004
Messages
13,288
Location
Arlington, TX
Program the channel conventionally. Those items will display during decode. Use the info to program it into a DMR trunked.
 

RRR

Member
Premium Subscriber
Joined
Dec 6, 2005
Messages
1,317
On the other hand, if you get a TRX-1/2 and program it in as a DMR channel in a scan list with your other frequencies you like to monitor, it will show TG, CC, TS and freq info for you without doing all that, then go right back to scanning when they are done talking.

I like having DMR freqs right there in my normal scan list to see different TG's pop up on occasion, instead of having to dedicate the scanner to searching for it on one freq., then later putting it in a scan list and not being able to see/confirm who is talking.
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
22,058
Location
Bowie, Md.
Did you look in our database to see if someone has already done this? When you look at the frequency, click on the site name, then look at the very bottom of the resulting page. It's not obvious unless you know precisely where to look

Mike
 
Status
Not open for further replies.
Top