fire tone outs

Status
Not open for further replies.

de784

Member
Joined
Aug 14, 2004
Messages
735
Location
Delaware
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 4.2.2; en-us; HTC6435LVW 4G Build/JDQ39) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Mobile Safari/534.30)

Uniden 436 is the first scanner I own that is
capable of doing this. I fire the frequency and tones for my county. My question is the feature do I have to put my scanner in standby mode or when the tones are activated does it come over when I am scanning my systems.
 

de784

Member
Joined
Aug 14, 2004
Messages
735
Location
Delaware
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 4.2.2; en-us; HTC6435LVW 4G Build/JDQ39) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Mobile Safari/534.30)

Ok thank you
 

de784

Member
Joined
Aug 14, 2004
Messages
735
Location
Delaware
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 4.2.2; en-us; HTC6435LVW 4G Build/JDQ39) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Mobile Safari/534.30)

One more question what does the delay function do?
 

de784

Member
Joined
Aug 14, 2004
Messages
735
Location
Delaware
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 4.2.2; en-us; HTC6435LVW 4G Build/JDQ39) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Mobile Safari/534.30)

Thanks again
 

ColonelMike

Member
Joined
Jul 18, 2009
Messages
327
Location
Shepherdsville, KY
Mine alerts when it is scanning as long as it goes to the channel before the transmission is done. If it is stopped on another channel, then the alert may not go off unless the transmission drops and it scans on. Hope that helps.
 
Status
Not open for further replies.
Top