• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Flash/DSP Matrix Sheet Help Needed!

Status
Not open for further replies.

rmiles

Member
Joined
Jul 12, 2003
Messages
248
I'm looking for the Revision 10 and 11 Flash/DSP Matrix sheet for the 700P/P5100/P7100/M7100. I have the sheets for revision 9 (Jan 2006 for ProGrammer R16A) and revision 12 (Dec 2006 for ProGrammer R20) but need 10 & 11. Can anyone please help out here? I have ProGrammer R17 & R18 and need to know which codes were specifically written for those versions.
 

LMR_Dude

Member
Joined
Mar 26, 2010
Messages
115
I can only find the DSP/Flash matrix dated 5 May 2009, unsure of what revision number it is only that it the most current one.
 

wireless_friendly

Completely Banned for the Greater Good
Banned
Joined
Oct 4, 2005
Messages
167
I can only find the DSP/Flash matrix dated 5 May 2009, unsure of what revision number it is only that it the most current one.
It's too new, but also interesting. Could you please send it to specified above e-mail?
 
Status
Not open for further replies.
Top