-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Flashcode Question???
- Thread starter BRFD-118
- Start date
- Status
Conventional / Trunking
Ok, I was looking in to purchasing a XTS3000 to passively monitor a 800mhz P25 system in Roanoke City/ County. There are two radios i was looking at and i wasnt completely sure which was the right set up that i needed
Radio 1:
Flashcode: 100008-000000-0
Q806/G806 IMBE / APCO-25 Digital Operation
H38/G51 Smartzone Operation
Radio 2:
Flashcode: 589008-001E80-0
Q806/G806 IMBE / APCO-25 Digital Operation
H14/G114 Digital ID Display
H868/W298 Conventional Multikey and Analog Conventional MDC OTAR
G170/H43 Remote Monitor and Radio Trace
H46 One-Touch Operation
H38/G51 Smartzone Operation
W947/Q947 APCO Packet Data
Q387 Conventional voting scan
Q173/G173 Smartzone OmniLink Operation
G182 Enhanced Radio Call Protocol
Q361/G361 Digital APCO-25 IMBE Trunking (9600kb Control)
Radio 1:
Flashcode: 100008-000000-0
Q806/G806 IMBE / APCO-25 Digital Operation
H38/G51 Smartzone Operation
Radio 2:
Flashcode: 589008-001E80-0
Q806/G806 IMBE / APCO-25 Digital Operation
H14/G114 Digital ID Display
H868/W298 Conventional Multikey and Analog Conventional MDC OTAR
G170/H43 Remote Monitor and Radio Trace
H46 One-Touch Operation
H38/G51 Smartzone Operation
W947/Q947 APCO Packet Data
Q387 Conventional voting scan
Q173/G173 Smartzone OmniLink Operation
G182 Enhanced Radio Call Protocol
Q361/G361 Digital APCO-25 IMBE Trunking (9600kb Control)
Where are you seeing radio #2 ?
Does it have proper 6.whatever firmware?
Does it have proper 6.whatever firmware?
found on eLightbars for sale heres link
sale trade xts3000 800 mg mod 3 for xts3000 vhf For sale ht750
sale trade xts3000 800 mg mod 3 for xts3000 vhf For sale ht750
Without the firmware info it's impossible to tell.
- Status
Similar threads
BCD436HP/BCD536HP:
BCD436HP - SCAN speed very slow
