• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

fleetsync tk790 tk280

Status
Not open for further replies.
T

Theroofable

Member
Premium Subscriber
Joined
Apr 14, 2010
Messages
42
Is it just outdated software, or is there no ability to decode a fleetsync id and display the id on the tk790 radios? I am having the same problem with my tk280, even though the display id is turned on in the programming software.
 
T

Theroofable

Member
Premium Subscriber
Joined
Apr 14, 2010
Messages
42
Is that a firmware upgrade? Im having the same issue with 2 tk2170s, which are a few years old. The caller id is set to on, but doesnt display. Thanks for the help. It sucks, the 790 is a great radio for fire trucks and ambulances, but it should have that ability.
 
Status
Not open for further replies.

Similar threads

Rik
SDRtrunk DMR simplex not decoding
Replies
3
Views
406
Rik
Rik
Baker845
APX-6000 question
Replies
3
Views
472
Baker845
Baker845
A
Dual Capacity Direct Mode/CC15
Replies
4
Views
471
wd8chl
W
J
BCD436HP/BCD536HP: Volume offset Sentinel with '536
Replies
8
Views
571
jackmail226
J
P
G4/G5 Call Alert Paging
Replies
5
Views
604
talviar
T
Top