Frustrated Programming

[skinink66]

:x Trying to program the new Burlington County freqs into my Pro-96 with updates. Heres my setup. Bank 02 NW freqs then blank conv. channel, NC freqs then conv channel, etc. I have all listed talkgroups entered as well. I have had these in and working for about two weeks, but after I added Philly in Bank 9, now all I get when scanning Bank 2 for example is:

S200 ...... +MO
VC -and it gives me random freqs that do not corispond to anything programmed
NW CTRL - My label
Countywide - Talkgroup label

Problem is, while it shows me the information, I get no sound. I was able to up until today, heard everything crystal clear. Why all of a sudden would I not be able to hear anything? Any help would be appreciated!
Thanks in advance!

John Hamilton

 

[Voyager]

:x Trying to program the new Burlington County freqs into my Pro-96 with updates. Heres my setup. Bank 02 NW freqs then blank conv. channel, NC freqs then conv channel, etc. I have all listed talkgroups entered as well. I have had these in and working for about two weeks, but after I added Philly in Bank 9, now all I get when scanning Bank 2 for example is:

S200 ...... +MO
VC -and it gives me random freqs that do not corispond to anything programmed
NW CTRL - My label
Countywide - Talkgroup label

Problem is, while it shows me the information, I get no sound. I was able to up until today, heard everything crystal clear. Why all of a sudden would I not be able to hear anything? Any help would be appreciated!
Thanks in advance!

John Hamilton

Sounds like you turned the tables on or messed them up if they are required for that system.

Not sure what you mean by 'my label' and 'TG label'. If you mean TG NUMBER, that means you have no TG programmed in with that number and a text ID. If you do have it in there, maybe you disables that trunk bank and have it on OPEN mode.

Joe M.