KM4WLV
Member
I wanted to do a quick poll if some of you would be so kind as to give me your opinions......
A few weeks ago when I acquired my G1 and programming stand it was my first time using the Unication PPS or G1 pager. I've been really impressed so far. Anytime I get a new piece of equipment one of the first things I do is dig into the software (if it's something I've never used before) and test / try out the various features of the pager or radio I'm programming.
I know that there is a programming guide out there from Unication but it's kind of vague & left with me more than a few questions on what different settings do, including the info in the "help" tab in the PPS itself when you click on the options and the info pops up on the right. My question is this........ I'm debating writing a detailed programming guide for the G1 pagers. The way I would write this manual would be to basically go tab by tab explaining what each function/option is. Example: Tab G1: Channel Parameter Setting - Explaining the channel parameter settings when entering frequency information, CTCSS / CDCSS (DPL), etc. Tab H: Receiving Portfolio Setting - How to set up and enable Zones, then under each channel / knob setting what options are there, how to set/assign custom voice files, and the best settings for Reset Mode, Delay Timer, & Record Delay Timer, etc. God knows the reset mode and timers stumped me LOL.
So if you folks would be so kind as to offer your opinion/ideas I'd appreciate it. If I do move forward with the project I'll do it in PDF format & would be happy to have it shared with whoever needs it. The only thing I ask is for credit for writing it. Let me know your thoughts!!
A few weeks ago when I acquired my G1 and programming stand it was my first time using the Unication PPS or G1 pager. I've been really impressed so far. Anytime I get a new piece of equipment one of the first things I do is dig into the software (if it's something I've never used before) and test / try out the various features of the pager or radio I'm programming.
I know that there is a programming guide out there from Unication but it's kind of vague & left with me more than a few questions on what different settings do, including the info in the "help" tab in the PPS itself when you click on the options and the info pops up on the right. My question is this........ I'm debating writing a detailed programming guide for the G1 pagers. The way I would write this manual would be to basically go tab by tab explaining what each function/option is. Example: Tab G1: Channel Parameter Setting - Explaining the channel parameter settings when entering frequency information, CTCSS / CDCSS (DPL), etc. Tab H: Receiving Portfolio Setting - How to set up and enable Zones, then under each channel / knob setting what options are there, how to set/assign custom voice files, and the best settings for Reset Mode, Delay Timer, & Record Delay Timer, etc. God knows the reset mode and timers stumped me LOL.
So if you folks would be so kind as to offer your opinion/ideas I'd appreciate it. If I do move forward with the project I'll do it in PDF format & would be happy to have it shared with whoever needs it. The only thing I ask is for credit for writing it. Let me know your thoughts!!