• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

G2 or HE monitoring DMR Cap + systen

Status
Not open for further replies.

n9upc

Member
Joined
Jan 18, 2003
Messages
263
Location
Land of mixed mode digital comms
Wonder if anyone knows if a Unovagion G2 or G3 with DMR can monitor a Cap + System. Be it trunk for poor man's trunked I am not sure?

My two - way radios (Kenwood or Anytime) will not decode traffic. If not scanner land I am bound!
 

W8RMH

Feed Provider Since 2012
Joined
Jan 4, 2009
Messages
8,110
Location
Grove City, OH (A Bearcat not a Buckeye)
 

IAmSixNine

Member
Feed Provider
Joined
Dec 19, 2002
Messages
2,444
Location
Dallas, TX
there was a thread about this a while back.
commercial gear (moto, hytera) will not pass audio when RAS is enabled on the system.
Going off memory, but i believe the Unication units are the same way. Originally i thought they didnt but there is a thread out there where users said they wont. I gave up on using a G5 to listen to some small UHF Cap + systems.
 

n9upc

Member
Joined
Jan 18, 2003
Messages
263
Location
Land of mixed mode digital comms
there was a thread about this a while back.
commercial gear (moto, hytera) will not pass audio when RAS is enabled on the system.
Going off memory, but i believe the Unication units are the same way. Originally i thought they didnt but there is a thread out there where users said they wont. I gave up on using a G5 to listen to some small UHF Cap + systems.
Not to go off track but do scanners do it then?
 

IAmSixNine

Member
Feed Provider
Joined
Dec 19, 2002
Messages
2,444
Location
Dallas, TX
Scanners ignore RAS.
So system with RAS scanner will work fine.
In fact a local mall went form conventional DMR to Cap Plus DMR with RAS.
Same frequencies, my scanner works great. My XPR7550 nothing.
 
Status
Not open for further replies.
Top