• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

GE MASTR executive II pinout

Status
Not open for further replies.

WX5812

Member
Joined
Jul 30, 2018
Messages
398
Location
Fort Worth
I have a ge MASTR exe II repeater and it came with a d25 connector already on it but I don’t know which signal is at which pin. I’ve looked at some places but cannot find the exact layout as mine. I will include a picture.
Thanks
 

Attachments

  • 7C7A5762-C01B-44E6-9DFA-4378F81A33BC.jpeg
    7C7A5762-C01B-44E6-9DFA-4378F81A33BC.jpeg
    61.7 KB · Views: 23
  • DD60E316-E555-4C73-BD15-588F0A67CA1D.jpeg
    DD60E316-E555-4C73-BD15-588F0A67CA1D.jpeg
    53.3 KB · Views: 23

WX5812

Member
Joined
Jul 30, 2018
Messages
398
Location
Fort Worth
That’s where in the description is not exactly the same as mine. Mine only has j901a wires on it
 

WX5812

Member
Joined
Jul 30, 2018
Messages
398
Location
Fort Worth
It has a d25 pin with 7 wires in it. The orange,green,red,purple,black,blue,brown. If you can see in the pictures
 

WX5812

Member
Joined
Jul 30, 2018
Messages
398
Location
Fort Worth
To make things easier I did find a diagram.
Red is on pin 1, black on 3, brown on 4, blue on 6,purple on 8, orange on 14 and green on 7 of j901b. I see the diagram but I don’t exactly know what speaker hi/lo, volume hi/lo etc etc. I just need cos, TX audio, rx audio, Ptt is labeled. It’s going to a rc-1000 controller.
Any similar setups out there?
 

Attachments

  • 8CE7B021-3DDE-406A-884A-745BE8C46EAE.jpeg
    8CE7B021-3DDE-406A-884A-745BE8C46EAE.jpeg
    37.9 KB · Views: 16

Reelfishguy

Member
Joined
May 30, 2011
Messages
79
To make things easier I did find a diagram.
Red is on pin 1, black on 3, brown on 4, blue on 6,purple on 8, orange on 14 and green on 7 of j901b. I see the diagram but I don’t exactly know what speaker hi/lo, volume hi/lo etc etc. I just need cos, TX audio, rx audio, Ptt is labeled. It’s going to a rc-1000 controller.
Any similar setups out there?
 

Reelfishguy

Member
Joined
May 30, 2011
Messages
79
Did you ever find the information you needed? If not PM me. I have a lot of old GE manuals that I not discarded
 
Status
Not open for further replies.
Top