• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Getting frame error 10.0% after V1.3 upgrade on DMR

Status
Not open for further replies.

njfd

Member
Premium Subscriber
Joined
Aug 4, 2008
Messages
33
Location
Vernon NJ
Hi I’m Getting frame error 10.0% on Two DMR frequencies after upgrading to 1.30. It never happened 1.20. Please Two frequencies work normally on my SDS 200 All the other frequencies in the zone Give meme 0.0 frame error. also for some reason To and from fields all I get is DMR as shown in the picture instead instantly of the Radio ID. and for some reason the G5 on these two frequencies is acting as if it’s getting transmissions every few seconds. and when I have seen the radio uid there is no audio. any ideas or thoughts would be greatly appreciated thank you all😀
 

Attachments

  • 4B0E08D7-F540-4718-B4BD-2DDB7CA298C7.jpeg
    4B0E08D7-F540-4718-B4BD-2DDB7CA298C7.jpeg
    73.1 KB · Views: 40
  • 9E858E0D-6BCC-4A61-B04C-4A936FA6C558.jpeg
    9E858E0D-6BCC-4A61-B04C-4A936FA6C558.jpeg
    66.2 KB · Views: 40
Last edited:

njfd

Member
Premium Subscriber
Joined
Aug 4, 2008
Messages
33
Location
Vernon NJ
If anyone knows what this means thank you in Advance
 

Attachments

  • 968A463E-D37B-4B16-9ADE-3645E779B74E.jpeg
    968A463E-D37B-4B16-9ADE-3645E779B74E.jpeg
    73.9 KB · Views: 25
Status
Not open for further replies.
Top