• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

GPH Radio

roadie114

Newbie
Joined
Mar 13, 2017
Messages
1
I just picked up a GPH, non-command radio. The keypad will not lock/unlock by holding the FCN button. Do these radios not have this feature? Also, I heard there's a way to enable the scan to scan all channels, not just by individual groups only. I've looked through the menus in programming mode and didn't see any settings for these issues. Any ideas? Thx!
 

rsmith7799

Member
Joined
Sep 20, 2006
Messages
102
Location
Arroyo Grande, CA
Go under GLOBAL SETTINGS, CONTROLS, TOGGLE SWITCH ASSIGNMENTS, GROUP SCAN. I would put it under the TOUCHPAD. As you go through FCN, these options will come up as you press the FCN button. Then under each GROUP SETTINGS make sure GROUP SCAN is checked (under Other Options, left hand side at the bottom.) As far as the LOCK/UNLOCK, it should...be there as you press and hold down the FCN button.
See how these work and get back us, we're here to assist.
 
Top