Has anyone figured out how to get the system working in a scanner that trunks properly? I have 5 frequencies that are active for it:
451.325
451.725
451.9375
463.65
463.975
All are Color Code 1 and all show as XPT on my BCD436HP. In conventional, they have all picked up different talkgroups and User ID's, but when I program it as a DMR Trunked system and run the LCN finder, it NEVER comes up with all of them, and it seems like each time I run lcn finder, the channels show a different lcn than the preveous run. The strange thing is that all 5 frequencies seem to always have a beacon like that of a CAP system, it's like all 5 frequencies are acting as the rest channel.
then there's the weird talkgroup numbers, on the 436HP, I get normal talkgroup numbers of 3,4,5,etc. But on the TRX-1, I get talkgroup numbers like 1048578, which after running it thru a dec-to-hex converter comes out to 100002. I also get 2097153 (200001), 3145731 (300003), 4194306 (400002), and 5242882 (500002). I have about 50 of these talkgroups on the TRX-1, and all frequencies can display any of them. I thought 5 frequencies, 5 different possible talkgroups, but that's not the case.
I have tried to program the 5 frquencies into a DMR one frequency system with all 5 programmed, and also 5 different DMR one frequency systems, and both of them do not pick up a thing. When I program them into a normal DMR Trunk system with all LCN's at 0, I get bits and pieces of it, but nothing how it should work.
I live here in Gulfport and only get into the area about once a week, and usually run the LCN finder in the car for several hours at a time, but there is no pattern emerging. If anyone is closer to the Biloxi Grand, maybe you can check it out and see what I might be doing wrong. I've worked on this system trying to figure it out now for over a year, with not much luck. Any help would be appreciated. Thanks.
451.325
451.725
451.9375
463.65
463.975
All are Color Code 1 and all show as XPT on my BCD436HP. In conventional, they have all picked up different talkgroups and User ID's, but when I program it as a DMR Trunked system and run the LCN finder, it NEVER comes up with all of them, and it seems like each time I run lcn finder, the channels show a different lcn than the preveous run. The strange thing is that all 5 frequencies seem to always have a beacon like that of a CAP system, it's like all 5 frequencies are acting as the rest channel.
then there's the weird talkgroup numbers, on the 436HP, I get normal talkgroup numbers of 3,4,5,etc. But on the TRX-1, I get talkgroup numbers like 1048578, which after running it thru a dec-to-hex converter comes out to 100002. I also get 2097153 (200001), 3145731 (300003), 4194306 (400002), and 5242882 (500002). I have about 50 of these talkgroups on the TRX-1, and all frequencies can display any of them. I thought 5 frequencies, 5 different possible talkgroups, but that's not the case.
I have tried to program the 5 frquencies into a DMR one frequency system with all 5 programmed, and also 5 different DMR one frequency systems, and both of them do not pick up a thing. When I program them into a normal DMR Trunk system with all LCN's at 0, I get bits and pieces of it, but nothing how it should work.
I live here in Gulfport and only get into the area about once a week, and usually run the LCN finder in the car for several hours at a time, but there is no pattern emerging. If anyone is closer to the Biloxi Grand, maybe you can check it out and see what I might be doing wrong. I've worked on this system trying to figure it out now for over a year, with not much luck. Any help would be appreciated. Thanks.