GRE Release new CPU Firmware vF1.3 for PSR-500/600

Status
Not open for further replies.

to2way

Member
Premium Subscriber
Joined
Feb 16, 2004
Messages
61
Location
Toronto
Available on the GRE Support Site!

Release Notes Attached below:

CPU Production Firmware Version 1.3 release notes:

- This is the user loadable version of the Factory 1.3 CPU firmware.
Will display as "uP Appl Ver:U1.3" after loading and is identical to
the factory "F1.3" load.

- Please use with DSP version 1.2 or higher, otherwise some features
may not operate properly


New features:

- Added 'C' command to PC/IF protocol:
STX 'C' <bitmap> ETX <sum>
<bitmap>: bit 0 = CCDump on=1, off=0
bit 1 = DSPDump on=1, off=0
These settings are temporary. They're not written to the EEPROM
Glob area. A power cycle will revert to the EEPROM Glob settings.


Fixes / Enhancements:

- Fixed CCDump output for EDACS message pairs for 3rd party software
compatibility.

- Improved reliability of the NAC display within the TSYS Analyze mode.

- Changed P25 TSYS Analyze LCD display to increase readability against
publicly available system data. ("HHH" = Hex, "DDD" = Decimal):

From: "Sys:HHH RHH SHH"
To: "Sy:HHH RDDD SDDD"
 
Status
Not open for further replies.
Top