• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

H3 Hummer Installation???

Status
Not open for further replies.

kb9tfh

Member
Joined
Jul 30, 2004
Messages
1
Location
South Bend, IN
Any suggestion on installing Icom 706mkIIg and a Digital Scanner (like the BC-896)?

I dont know where to start, the vehicle is not radio friendly...


Joe KB9TFH
 

ScanDaBands

Completely Banned for the Greater Good
Banned
Joined
Jan 21, 2005
Messages
0
Location
State Line
Never had the task of installing in one of those - would recommend definitely keeping that vehicle locked up somewhere safe , that's some NICE EQUIPMENT you'll be installing.
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,532
Location
NJ USA (Republic of NJ)
kb9tfh said:
Any suggestion on installing Icom 706mkIIg and a Digital Scanner (like the BC-896)?

I dont know where to start, the vehicle is not radio friendly...


Joe KB9TFH

You might find some info on the web sites below. I am not sure where I read about it but I saw somewhere on the web a radio tray kit of some kind that can be installed. I think it may have been modeled after the military version. Good luck & please post back your
results - it would be interesting to read.

http://www.hummerforums.com/

http://www.autotalk.com/autonews/hummer/
 

kb9tfh

Member
Joined
Jul 30, 2004
Messages
1
Location
South Bend, IN
I will take some pictures when I get it done... I figured out where I am putting the Icom-706 but I have no Idea where to put the Digital Scanner (BC-996t).

Any Thoughts?


Joe KB9TFH
 
Status
Not open for further replies.
Top