HAFB Site-07

[gldavis]

I know what you're gonna say. There is no Site-07. Well, there is now. CC=4061125. ACC=406.3625, 407.4250, 407.8125, and 408.1000. Found/spotted/discovered this morning. So far all traffic is from the Base. About a third of what is heard on Site-01. Nothing from UTTR (yet).

 

[enosjones]

Do we got a location on it, I know it is very hard to pinpoint locations for that system, site 4 and 6 reflect that

 

[enosjones]

I just know I could hear site 6 up on the west side of Salt Lake County, didn't hear site 4

 

[gldavis]

Site-04 I have received while out in the vicinity of UTT/Wendover Range (Tooele Co). I have several locations I goto to monitor what is out there.
Site-06 I can receive (kinda) at my Bountiful location. Site-07 is new (to me) and I haven't done a lot with it (yet).

My location on the Bountiful Bench (control channels)
Site-01 -61.8 dBm
Site-02 -71.5 dBm
Site-03 -72.3 dBm
Site-04 not heard
Site-05 -101.5 dBm
Site-06 -70.9 dBm
Site-07 -67.8 dBm
P.S. Site-07 has had the same control channel for (at least) two days now. All the channels for this site are id'ing as alternates.

 

[enosjones]

Once u get the info and location(s) of not only site 7 but any input on sites 4 and 6 locations submit them or ask one of us to submit them

 

[gldavis]

Will do. looks like a trip out to Knolls Rec Area is in order. Maybe swing by Oasis on the way back.

Site-01 is showing no peers. Site-02 shows Sites 1 and 5. Site-06 is showing Sites 1, 5, and 7. Site-07 is showing 1 and 6.

 

[gldavis]

Will do. looks like a trip out to Knolls Rec Area is in order. Maybe swing by Oasis on the way back.

Site-01 is showing no peers. Site-02 shows Sites 1 and 5. Site-06 is showing Sites 1, 5, and 7. Site-07 is showing 1 and 6.

Site-01 now showing peers Sites-02 (406.7625), 03 (407.9625), 05 (409.9625), 06 (408.4250), 07 (406.1125).

 

[enosjones]

Are u using unitrunker or something? Dsdplus?

 

[gldavis]

I am using Unitrunker. The original version. I haven't switched over to the current version.

 

[pmstewart]

The new v2 (as I recall) only supports sdr and there are only about 3 or 4 models that it currently supports.

 

[enosjones]

Unitrunker v2 will Not do line in receiving, which means u can't just hook up a scanner using the line in or discriminatory tap or headphone jack to recieve info, sdr dongles only, which sucks. Doesnt sound like that will change either

 

[gldavis]

Good to know. Thanks

 

[pmstewart]

I wanted to purchase a couple of sdr's to start scanning for the P25 stuff that's coming. So I joined the v2 group and have been monitoring their progress. V2 is still in beta but there are folks using it. Some screen caps posted and it looks mostly the same once you get it up and running. The setup is very different than v1.

 

[gldavis]

I have several SDR's, but have been to busy (lazy) to hook them up and try. I am comfortable with/know V1, and might be to old for new tricks.

 

[enosjones]

Unitrunker v2 probably won't do anything higher than phase 1, doesn't sound like they want to go that route since Unitrunker is free, it would force them to offer a paid version and it don't sound like they want to do that, they'd rather keep it free. So when we go to phase 2 Unitrunker probably won't help much, it may decode site numbers and system ID but probably won't do much else...

 

[enosjones]

As long as we have phase one sites or Motorola, edacs, or mpt1327 sites it will still decode those