• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Harris/Tait TP3350 handheld - is battery pin out positions for charger same as TP8100/9300 battery pin outs?

G

g8tzl2004

Member
Joined
Jun 4, 2010
Messages
262
Reaction score
17
Is a Harris / Tait TP3350 battery pin out positions the same as a TP8100/9100 battery charge pin outs?

Comparing a real TP8100 battery with pictures of a TP3350 battery, the contact positions appear to line up but the functions (+ve, -ve etc) might be different?

The Harris / Tait TP3350 does not use the same battery charger as a TP8100/TP9100.

But can I temporarily "line up" a TP3350 battery (with an elastic band, cardboard packing, tape etc) in a TP8100/TP9100 charger in order to charge a TP3350 battery?

Alternatively, can I use a "universal" 2 wire (+ve and -ve) lithium charger to charge a TP3350 battery? Or is there some type of TP3350 battery detection circuit which only allows the official TP3350 lithium charger to be used?

Thanks
 
You must log in or register to reply here.

Similar threads

G
  • Locked
TRI Harris PRC-152 - confusion over radio pin out, battery pin out and TRI charger pin out?
Replies
1
Views
2K
g8tzl2004
G
Top