• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Harris Unity XG-100P driver help...

Status
Not open for further replies.

SuperPhly

Member
Premium Subscriber
Joined
Feb 26, 2012
Messages
12
Does anyone know where I can download the driver install file for the Harris Unity XG-100P? The manual says its on the disc with the keyloading software and called unity setup.exe, but I'm doing work from home tonight and even though my laptop previously had no issues with using RPM to load a unity, for some reason it's failing to load the driver and wants to re-install. Any help would be appreciated.
 

Cheesedoff

Member
Joined
Jul 4, 2011
Messages
25
The driver file comes with the latest version of rpm ver 6b or later. In the setup page their is a setup for the unity driver.
 

SuperPhly

Member
Premium Subscriber
Joined
Feb 26, 2012
Messages
12
FYI, the help file was also correct. THe Unity drivers were on the Key Manager disc as well in a stand-alone setup file.
 
Status
Not open for further replies.
Top