DSDPlus Having issue with a system not showing info

[bravo14]

Good morning, I notice the past few times on a system been picking up Citrosuco North America Trunking System, Lake Wales, Florida On the dsd not able to see system name site. I did look in the freq section and double check make sure no double freq and nothing found just 2 of the same freq 2 one is for a different system using a different lsn and color. I did double check the names on each of the freqs, network, group and site. I do hear audio and it is 1 freq for the system. Here is a screen shot.

 

[CanesFan95]

Well, that 1 frequency isn't showing up in your Channel Activity window. Can you show us just the DSDPlus.networks, DSDPlus.sites, and DSDPlus.frequencies files with the notepad title bars showing? I can't tell which one is which in the photo.

 

[bravo14]

Well, that 1 frequency isn't showing up in your Channel Activity window. Can you show us just the DSDPlus.networks, DSDPlus.sites, and DSDPlus.frequencies files with the notepad title bars showing? I can't tell which one is which in the photo.

I decide to delete that other same freq out and it started to work.

 

[mwjones]

I decide to delete that other same freq out and it started to work.

If you have multiple Capacity+ systems with the same frequency, DSDPlus doesn't know how to distinguish the system you're wanting to monitor since they don't broadcast a unique ID (the same is true for TierIII systems as well). For that reason, if you add the Color Code as an additional field, this will give it at least a fighting chance of getting the right system (I'm in a very dense radio area, so I see a lot, and if I'm with the mobile rig, my location may dictate which system I'm monitoring).

So your DSDPlus.frequencies line should look like:

Cap+, 12382, 1, 1, 462.3250, 0.0, 0, 2

You could then re-add the other line with the same frequency and do the same, and it will distinguish between the two (unless the other system is also using DCC 2)

Support for this feature has existed since FastLane version 2.324 - from the Notes.txt:

Added DMR system disambiguation via DCC support in the DSDPlus.frequencies file.

This feature is primarily designed for Cap+ systems where sites share common frequencies.
DCC values can be appended to DMR channel entries in the DSDPlus.frequencies file.

Example:

Cap+, 1234, 3, 1, 454.7625, 0.0, 0, 12

Cap+, 1234, 7, 1, 454.7625, 0.0, 0, 14


If FMPx is manually tuned to 454.7625 and DSD+ detects a Cap+ datastream,
DSD+ will use the received digital color code to determine whether site 3
or site 7 is being monitored.

A DCC does not need to be added to a DMR frequency entry unless disambiguation is required.

You should edit the comment at the top of the DSDPlus.frequencies file
to reflect the new optional DCC field:

Old: ; protocol, network ID, site number, ... sort order

New: ; protocol, network ID, site number, ... sort order [, DCC]