Is there any way to listen to my scanner audio on a Windows computer over the network. Siren works fine on my phone, but can i use my pc?
Thanks All! I know Proscan will work and does the job flawlessly.
I tried using the striped down version, but a BCD996XT panel shows up and not the BCD536HP. Also, and this is probably me, I can't find the place for setting for the IP address of the scanner.
What am I doing wrong?
Mike
RadioFeed will work too, just no remote control. You're asking about the scanner IP so I take it you are using the Wi-Fi.
Basically here are steps.
Scanner Setup
1. Check the scanner Wi-Fi dongle firmware is at 7.28
2. Check the Scanner Wi-Fi is in Access Point mode.
3. Note the scanner IP address.
RadioFeed / ProScan Setup
4. In RadioFeed or ProScan, set the scanner type to BCD536HP.
5. Go to the Audio Web Server tab and set the audio input to URL.
6. Click the URL Setup button and enter the scanner IP exactly like the example.
7. For metadata or remote control, go to the Comm Port setup and set the port to URL.
8. Click the URL Setup button and enter the scanner IP exactly like the example.
Thank you very much for your help. I was using the wrong program, Client instead of Radio Feed! However, I am still having problems. I set it up as per your instructions. The metadata tab shows that the data is coming across. I still have no audio. I downloaded Proscan, and running it on the 30 day trial it works perfectly! I must have overlooked something, but I don't know what. I hope to get enough saved to get the full version of Proscan eventually. That is a beautiful program! Till then I am hoping to get Radio Feed up and running. Thank you for your patience!
Mike
Still no connection. The TCP and UDP seem to connect ok on the Metadata tab, but not on the audio control tab. The TCP also connects and disconnects. I uninstalled the Proscan program and the Client program and still no luck. I am going to reinstall Radio Feed and see if that helps. My computer must be messed up someplace!
Mike
Do you have the audio out from the 536 plugged into your computer audio in, and/or is the audio Iinput Sound Device set for URL?
Set for URL
Mike
Can you cut & paste the audio URL here to see if it's the right form.
Here it is:
rtsp: //10.24.190.34/au:scanner.au
Mike
I solved it! Thanks you sir! Once I pasted it above I noticed the extra space between the double slash and the semi colon. Thanks for all your Help! It works great now, fantastic audio!
Mike
RadioFeed will work too, just no remote control. You're asking about the scanner IP so I take it you are using the Wi-Fi.
Basically here are steps.
Scanner Setup
1. Check the scanner Wi-Fi dongle firmware is at 7.28
2. Check the Scanner Wi-Fi is in Access Point mode.
3. Note the scanner IP address.
RadioFeed / ProScan Setup
4. In RadioFeed or ProScan, set the scanner type to BCD536HP.
5. Go to the Audio Web Server tab and set the audio input to URL.
6. Click the URL Setup button and enter the scanner IP exactly like the example.
7. For metadata or remote control, go to the Comm Port setup and set the port to URL.
8. Click the URL Setup button and enter the scanner IP exactly like the example.
I asked Don this exact question last year when I was just inches away from hitting the "buy" button. (Having previously purchased win96 and win500 for which I lost my key) He never replied and I never bought. Thanks for the answer, I may reconsider.