Help for activate 5 tone decode NX300/800.

[dsankir]

Hello,

I want to decode 5 tone incoming signals on analog side my nx 300/800 radios.Any idea how to activate it?

Regards

 

[kd4efm]

5 tone?
Not on a nx-x00 series.
Sorry.

 

[dsankir]

Thanks for answer.
I ve just saw it on software,tried but no luck.
Thanks anyway

 

[kd4efm]

curious what software you saw 5 tone on?
I have been through kpg 111, 141, D1, D3, D6, fixing to look in kpg- 95 and a few other.
Just curious how this 5 tone was thought that kenwood has it.

and KPG-95 D does not do 5 tone either

 

[N5XPM]

I believe ICOM has some 5 tone signaling in some LMR models, but it has been awhile since I checked.

 

[ramal121]

Europe models use 5/6 tone in lieu of 2 tone, I believe.

 

[kd4efm]

Europe models use 5/6 tone in lieu of 2 tone, I believe.

AHHH that's right, forgot about that E models.

 

[dsankir]

Hi,

is it 5 tone or not?

 

[ramal121]

Yes, that would be the parameter settings for 5 tone. What are you looking to accomplish?

 

[dsankir]

Want to decode incoming 5 tones on repeater.
No idea how to activate this function,when the radio hear 5 tone signals.

 

[ramal121]

Well we don't have 5 tone in north america but it should be like 2 tone which we do have.

First, if you want to decode an unknown 5 tone number string, this radio will not do that.

To use 5 tone you will have to have the proper codes in advance and program them into the decode section. With that you can set up the radio to respond to these codes and perform functions like sel call, call alert, and/or horn honk.

 

[N5XPM]

a recording of the desired tones attached here might help.
I am wondering if this is ANI tones and not 5 tone.
Knowing which agency would help quite a bit.
Based on where you are, I don't have much experience if that is where the agency is located.

 

[kd4efm]

Being in Turkey, I know they use 5 tone for repeater ACCESS, like we use CTCSS or DPL.
Might get a little more info from my friends in Turkey if I knew what callsign repeater you're trying to
get info from.

 

[dsankir]

Being in Turkey, I know they use 5 tone for repeater ACCESS, like we use CTCSS or DPL.
Might get a little more info from my friends in Turkey if I knew what callsign repeater you're trying to
get info from.

Mr.SERDAR says hi to you