Help needed Radioshack Pro-2052

[ManofSteele1690]

My Pro-2052 has been working great until one day i hit something and now it will not search within the trunked freqs. I'm located in Florida and cleared the memory of the scanner and entered the EDACS system i have trunk set up for bank one as "ED", it will scan but when i hit search it starts searching all freqs the scanner can use and drops off from trunk, never had this issue until lately, I also have a RadioShack pro-94 with the same bank of freqs set and it searches the trunked freqs just fine and works. any help is good help. below is how i have it set up with what freqs in what order.

002 (2)	County East (System - 2/B)	01 856.2625a	02 856.9875a	03 857.7625c	04 858.4875	05 859.7125	06 860.4875	07 855.4625
		08 856.4875a	09 857.4875	10 858.7375	11 859.2625	12 859.7625	13 860.7375	14 854.3625a
		15 856.9375	16 858.2625

 

[wtp]

are you hitting the search button or the scan button ?

 

[ManofSteele1690]

Search, when i hit scan, it just scans the 800mhz doesn't show the decimal freqs.

 

[wtp]

from the videos i have seen you hit the scan button to scan the systems you have entered.
maybe you locked out the control channel ?
so, maybe go through the channels and see if any are locked out.

 

[ManofSteele1690]

from the videos i have seen you hit the scan button to scan the systems you have entered.

per the manual to scan edacs system you hit trunk then search its what i have always done but all the sudden something happened or i hit something and its no longer working in that manner just looking for some insite form anyone that might know what im doing wrong.

 

[wtp]

AS AN UPDATE, HE RE-PROGRAMMED THE RADIO, AND ALL IS FINE.

 

[ManofSteele1690]

using this website i used "b" and used bank 2 and its working like a charm

Volusia County 800 MHz Trunked System (kevininscoe.com)

just now my Pro-92 is different transmissions then my pro 2052

a few different frequencies from that list

 

[ManofSteele1690]

reprogrammed bank 3 with the same freq as my pro-92 seems to be working besides a few static pickups on the pro 2052 vs the pro-92 but could just be the antenna