Help needed to ID a new Sysid

Status
Not open for further replies.

sking128

Member
Joined
Jan 10, 2004
Messages
199
Reaction score
3
Location
Colorado Springs, Co
Hi all,
I was doing a search a few days ago and came across a new SYSID in the 407Mhz range. specifically 407.9625 MHz M36:A931. New PAFB system maybe? I don't hear the PAFB FD on their old VHF channel any more. Any Info would be helpful.

TIA

Steve
 

AngelFire91

Member
Database Admin
Joined
Apr 30, 2002
Messages
344
Reaction score
7
I'm not in town right now so I can't offer to much help, but before I left I also heard this and it seemed to have properties of Ft. Carson. Don't quote me on that though.
 

mpdonala

Member
Joined
Jun 25, 2004
Messages
88
Reaction score
1
Location
Colorado Springs
400 mHz

Hi Steve did you get any associated id with this Freq. have been working on Info for Ft. Carson and I belive what you got was the control freq for Carson but have been unable to get any ID's with it. Keep us informed. Mark
 

tracker1

Member
Joined
Dec 19, 2002
Messages
52
Reaction score
0
Location
Pueblo County
PAFB Trunk

I believe the new Peterson AFB Trunk is now on the air, probably in a burn in or test phase. Haven't caught any conversations yet but the PRO96DMP utility yields the following info:

Summary for site WACN BEE00 Sys 157 Sub 01 Site 01 channel 2-86C(409.51250)
0 Base 851006250 Spacing 6250 Tx Offset 45000000
2 Base 382562500 Spacing 12500 Tx Offset -180000000
3 Base 136000000 Spacing 12500 Tx Offset -100000000
channel 2-75F(406.15000)
channel 2-7D0(407.56250)
channel 2-7FA(408.08750)
channel 2-800(408.16250)
channel 2-820(408.56250)
channel 2-85C(409.31250) (control channel)
channel 2-86C(409.51250) (control channel)
WACN BEE00 Sys 157 Sub 01 Site 01 channel 2-86C(409.51250)
-----------
First heard Sept 5th, 2004
SysID:157
Site: T0101
CT: BEE00
Motorola APCO-25 9600 baud
 

tracker1

Member
Joined
Dec 19, 2002
Messages
52
Reaction score
0
Location
Pueblo County
Now hearing testing on the Peterson AFB trunk

Just a followup to my earlier post about the new Peterson AFB Trunk system. Another post to the Trunker/Etrunker/T4Win Decoders forum helped me understand they are using P25 Channel Identifier 2, along with the programming implications.

I'm now hearing ocassional testing on TG 0001. Needed to program my PRO96 using Win96 as follows:
Bank Type: MOT

Frequency Receive Mode
409.3125 MOT
409.5125 MOT
(these are the two control channels)

MOT 9600 CC: Multi table

Extended tables:
# CH Lo Ch Hi Base Freq Offset Step
00 8192 12287 382.56250 8192 12.500
 

sking128

Member
Joined
Jan 10, 2004
Messages
199
Reaction score
3
Location
Colorado Springs, Co
I believe the new Peterson AFB Trunk is now on the air, probably in a burn in or test phase. Haven't caught any conversations yet but the PRO96DMP utility yields the following info

tracker1,

Did you build a data slicer for the PRO-96? If so, can you post the plans?
The system you posted isn't the one I found, but I will monitor the new one also. The one I am looking at the CC's are 407.7625 and 406.775. definitely a 3600 Baud system. Not sure if you an pick it up in Pueblo, but you might try.

TIA

Steve
 
Status
Not open for further replies.
Top