Help Please.......

[goodyear2222]

Hi all,

I know we have covered this in previous posts but, i'm still confused I not that good with Math.

I would like to scan a Motorola UHF Type 2 Trunked System in my area.

-Using Trunker, how do I convert the HEX frequency's in the SYS File to get the correct frequency's to enter into my scanner :?:

-Using Trunker, how do I find out which are the input and output frequency's and which ones should I be monitoring with Trunker :?:

If someone can find it in their heart to help me with this, it would be greatly appreciated

Thanking you in advance
Shawn

 

[joepaigejr]

Which area are you located, and which TRS are you trying to monitor?

 

[goodyear2222]

I live in Toronto,Canada

This is what I was able to log, although I can't remember the System ID.

UnNamed System
MAP=22222222
OPTIONS=NVDF
PLAN=0
DESCR=Type II 97.3 Hz
THRESHOLD=0
DISPOSITION=abcbdbebfulznbpbsr
v0x000 ,0,ffff,5
v0x002 ,2,ffff,a
v0x00c ,c,ffff,9
v0x140 ,140,ffff,a
v0x17c ,17c,ffff,166
d 0x17d ,17d,ffff,0
v0x17e ,17e,ffff,179
v0x188 ,188,ffff,9e
v0x2bc ,2bc,ffff,b6

control channel-451.8500

 

[joepaigejr]

Have you tried the Canada forum here?

 

[loumaag]

d 0x17d ,17d,ffff,0

control channel-451.8500

The control channel is 0x17d and is 481.8500 based on your information. If you can provide one voice frequency I can probably tell you the base/offset/spacing. You also need to download the EricCottrell beta version of Trunker which will (once you supply the mapping) automatically fill the frequencies for you. You can get it here in this thread.

 

[Guest]

RADIO REFERENCE IS A **** HOLE!