• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Help to install Motorola T99DX+135W in-dash instead of trunked

Status
Not open for further replies.
A

almamater

Member
Joined
Aug 5, 2011
Messages
9
Hi,

I have some Motorola Motorola T99DX+135W radios. They were used to be for trunk install. I want to use them in-dash. To connect the Motorola A4 head to the radio, I need a little board that interfaces the radio and the head. I have one of these board(see pics)

I have one radio with the A4 head mounted on the radio using this boards. On the board it has the Motorola logo but I tried all the #'s but none of them refer to a part #

Do you know the part # and where I can get some?

Thanks

Chris
 

Attachments

  • DSC_4774.JPG
    DSC_4774.JPG
    76.5 KB · Views: 12
  • DSC_4775.JPG
    DSC_4775.JPG
    67.7 KB · Views: 12
Status
Not open for further replies.

Similar threads

T
Send a Hazloc radio to Motorola for repair in 2024
Replies
11
Views
939
tropiradio
T
S
XTL-5000 not turning on (used)
2
Replies
20
Views
1K
FFPM571
F
R
How to get rid of the codeplug password on a Motorola XPR 6550?
Replies
2
Views
663
N4KVE
N
A
Uniden CR-2021 receiver
Replies
0
Views
281
alok
A
N
Motorola XPR8400 bricked?
Replies
12
Views
1K
Nextgentow88
N
Top