Help with a system

[pfish]

Hello. I am in Florida right now, literally down the road from Eglin air force base. I've found their MOT II system on UHF and I have it programmed into my bc246t. Here is the info I have for it so far:

Eglin AFB
MOT II UHF
Control Channel: 407.6000 MHz
Voice: 407.5500 408.6500 409.0250 409.1500 409.2250 409.3000 409.9000 410.2000
Base: 406.000 MHz
Step: 25.0 KHz
Offset: 380

I'm able to hear what I think is maintenence on 48xxx and 49xxx. I'm also hearing Security on 53616. All of these work fine, but every once in a while a talkgroup like 5520 and some other low ones will come up. The scanner will attempt to switch to the voice frequency (its in CC only mode) and its just dead air.

I am thinking that something is programmed incorrectly. Does anyone see any mistakes in the information that I have?

Thanks in advance.

 

[Waldo325mvfd]

sounds like you dont have all the frequencies programed in to your scanner. you might want to search the 400-425 mhz range and see if you find anny other active frequencies. good luck. 8)