Help with programing Pro-2052

[randersonjr86]

Hi there im trying to program my scanner thru the computer. its a radio shack pro 2052. i cant seem to find any software that supports what im trying to do. im trying to program the Ocean County NJ Mot type 2 smart zone trucking system. i have a serial cable already but i cant seem to get this to work. please help. the info below is what im trying to program.

System Frequencies
Red (c) are primary control channels | Blue (a) are alternate control channels | Site Map(s): FCC Callsigns RR Locations

Site Hex Name Freqs
001 1 Simulcast
506.61250 506.66250 506.68750c 506.78750 506.81250 506.83750c 508.06250 508.08750
508.13750 508.16250 508.43750c





Ocean County Fire/EMS Talkgroups
DEC HEX Mode Alpha Tag Description Tag
928 03a A MONOCONTROL MONOC Control (formerly CMC Medcom) EMS-Talk
20512 502 A FIRE ZN 1 Fire Zone 1 (North Central) Fire-Talk
20544 504 A FIRE ZN 2 Fire Zone 2 (South) Fire-Talk
20576 506 A FIRE ZN 3 Fire Zone 3 (North) Fire-Talk
20608 508 A FIRE ZN 4 Fire Zone 4 (West) Fire-Talk
20640 50a A FIRE ZN 5 Fire Zone 5 (South Central) Fire-Talk
20672 50c A FTAC 1 Fire Tactical 1 Fire-Tac
20704 50e A FTAC 2 Fire Tactical 2 Fire-Tac
20736 510 A FTAC 3 Fire Tactical 3 (Station 85 Operations) Fire-Tac
20768 512 A Fire Coord Fire Coordinators Fire-Tac
20800 514 A Fire Marshal Fire Marshal Fire-Talk

 

[JANFINE]

In the Pro 2052 you have to put all the freqs in, I think. Not just the control channels.
Check out Scan Pro 2052. It's an older program but works good as far as control of the radio.
The Pro 2052 was made by Uniden for radio shack. The other older radio shack scanners are not controlable by the computer. The Pro 2052 also does a good job on the UHF Military aircraft band.

 

[spicerz]

Pro 2052

I have a Pro 2052. Scan Control is the only software I found that works well. It has a free trial and it pretty easy to figure out. Here's the link.

ScanControl Ver. 7.1