• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

help with XTS3000 programming

Status
Not open for further replies.

f1shs

Member
Joined
Jul 17, 2006
Messages
1
Hi folks !

I would lije to know with witch version of RSS / CPS my XTS3000 Mod 3 could be programmed .

Model H09RDH9PW7BN
Host R07.09.02 - DSPN 08.02.04
Flashcode 500008-000000-1

I've a RIB and a cable for programming both MTS2000 and XTS3000.

The radio could be read with a RSS 9.05.00 but "the software in radio is too new" as i could see ...

I've tried with CPS, but no connexion is possible.

Could you help me to know the right version of CPS or RSS ?

Thank's

Pierre
F1SHS
 

grem467

Member
Joined
Dec 19, 2002
Messages
884
Location
Houston, TX
You need to call motorola and obtain the current version of CPS, which is 5.00.02. The rib and cable you mentioned will work just fine.
 
Status
Not open for further replies.
Top