Help! Xts3000R - CPS won't read the radio

[Eaton90]

Greetings from the overseas ASTRO newbie!
I've bought the XTS3000R (model II) on ebay recently and also bought an aftermarket ribless programming cable for it. Yesterday I launched R.05.03.00 Astro Saber&XTS3000 CPS on my laptop and tried to read the radio (i've never done it with this radio before btw). "1CSQ" appeared on the display of the radio and after a while CPS provided me the following error message: "No user function provided to convert block type to block ID for block with type 32. Unpack failed."
Why can't I read my XTS? What's the problem and what can I do? Please help me!

And several facts abouth the radio itself:
FCC ID: AZ489FT4822
Model #: H09RDF9PW7BN
Flashcode: 1000040000004
R.05.52.03
DSPN 06.04.12
The radio appears to be in good condition, the serial number on the sticker matches the one provided in service mode...

Hope someone will help me. thanks in advance!

 

[IAmSixNine]

I have seen something similar on an MTS2000, its corrupt data or bad memory inside the unit. Basically the logic board either was forced something it was supposed to have, the memory has gone bad or corrupted. As far as fixing it, not sure what you can do but try to find a good working codeplug and program that into it. Try to get a hold of the original owner and see if he has a saved working codeplug..

 

[ASTRO2001]

hi there it is your Revison you have that same I do R05.03.00 the radio had R05.52.03 you have a old Revison it wont work I was on the phone with motorola yesterday about a similar thing it you have a older revison it wont work at all you got to get a newer one

 

[IAmSixNine]

hi there it is your Revison you have that same I do R05.03.00 the radio had R05.52.03 you have a old Revison it wont work I was on the phone with motorola yesterday about a similar thing it you have a older revison it wont work at all you got to get a newer one

He means the software he used to program the radios is R05.03.00 and the firmware in the radio is R05.52.03. They are two different things.

 

[Eaton90]

Maybe someone here's got a good codeplug for my radio (Xts3000, model II, UHF) and can mail it to me? If so, please contact me: eaton4310@yahoo.com