Home Patrol Extreme Searching and Database

Status
Not open for further replies.

Saint

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
2,428
Location
Fort Erie Ontario Canada
Can I get home Patrol to do this,
I have a list of Canventional frequencies I have made into a Favorites List and sent it to the Home Patrol, this list of frequencies is between 114000 Mhz and 136.Mhz, I have only this Favorite list activated to scan in the Home Patrol.

I want to use the Conventional Discovery mode and Make a search between 114000 Mhz and 136.Mhz, when I start the search will Home Patrol search the Favorites List I have activated and if any of the frequencies in the search is found in the favorites list Home Patrol will not log the audio or frequency.

Steve
 

Saint

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
2,428
Location
Fort Erie Ontario Canada
UPMan Home Patrol Extreme Searching and Database

Update to my question about Searching,

Hello UPMan, I did a test to see how well the Search feature works, this is what I did. I made a list of Aircraft Frequencies between 114.000 Mhz and 136.000 Mhz, there are 313 Frequencies and I did not put in any Tags. I set my Home Patrol to Scan Only this list.

I went into the Home Patrol and went to Conventional Discovery Mode and Set Limit Frequencies to 114.000 Mhz and 136.000 Mhz, set logging to All , compare to database to=On , record duration to 30 seconds.
I ran the search for One hour and these are my results,,,,
129.150 logged and recorded 2 hits
134.125 logged and recorded 5 hits
135.625 logged and recorded 3 hits
124.675 logged and recorded 2 hits
127.000 logged and recorded 4 hits
132.575 logged and recorded 1 hit
125.200 logged and recorded 5 hits
126.150 logged and recorded 7 hits
128.800 logged and recorded 2 hits
120.500 logged and recorded 2 hits
129.250 logged and recorded 1 hit
127.075 logged and recorded 2 hits
135.050 logged and recorded 2 hits
133.300 logged and recorded 5 hits
127.475 logged and recorded 1 hit
135.250 logged and recorded 3 hits
121.225 logged and recorded 1 hit
And so on, all the frequencies Home Patrol found were in my favorites list Home Patrol was set up with, why was it finding frequencies and logging them when it was supposed to skip past them.
Steve
 

Saint

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
2,428
Location
Fort Erie Ontario Canada
Found the problem !!!

Update to my question about Searching,

Hello UPMan, I did a test to see how well the Search feature works, this is what I did. I made a list of Aircraft Frequencies between 114.000 MHz and 136.000 MHz, there are 313 Frequencies and I did not put in any Tags. I set my Home Patrol to Scan Only this list.

I went into the Home Patrol and went to Conventional Discovery Mode and Set Limit Frequencies to 114.000 MHz and 136.000 MHz, set logging to All , compare to database to=On , record duration to 30 seconds.
I ran the search for One hour and these are my results,,,,
129.150 logged and recorded 2 hits
134.125 logged and recorded 5 hits
135.625 logged and recorded 3 hits
124.675 logged and recorded 2 hits
127.000 logged and recorded 4 hits
132.575 logged and recorded 1 hit
125.200 logged and recorded 5 hits
126.150 logged and recorded 7 hits
128.800 logged and recorded 2 hits
120.500 logged and recorded 2 hits
129.250 logged and recorded 1 hit
127.075 logged and recorded 2 hits
135.050 logged and recorded 2 hits
133.300 logged and recorded 5 hits
127.475 logged and recorded 1 hit
135.250 logged and recorded 3 hits
121.225 logged and recorded 1 hit
And so on, all the frequencies Home Patrol found were in my favorites list Home Patrol was set up with, why was it finding frequencies and logging them when it was supposed to skip past them.
Steve
:( Please disregard my problems getting the search to work properly, I did not have the search set to LOGGING NEW , this is why it was finding frequencies when it should not have.
Steve
 
Status
Not open for further replies.
Top