DSDPlus Hot Keys For AirSpy Gain?

Status
Not open for further replies.

CanesFan95

Active Member
Joined
Feb 14, 2008
Messages
3,014
Location
FL
AirSpys have 3 different gain settings. Is there a keyboard shortcut that turns 'em up and down? Thanks.
 

slicerwizard

Member
Joined
Sep 19, 2002
Messages
7,643
Location
Toronto, Ontario
Pressing '?' lists all of them.

Code:
Active keys:
 0-9 . Enter  set frequency
         [/]  select step size
  Cursor </>  step frequency
Ctrl Csr </>  step frequency by 250 Hz

           U  toggle unlicensed spectrum display mode
           M  toggle spectrum memory overlay
           X  reset spectrum memory
           Z  toggle spectrum zoom overlay
           I  select injection mode
         b/B  select bandpass filter
           F  select noise filter
           T  enable/disable tight bandpass filtering
           t  enable/disable bias tee
  Cursor ^/v  adjust volume level
    spacebar  toggle muting

         j/J  adjust LNA gain
         k/K  adjust mixer gain
         l/L  adjust VGA gain

           R  toggle raw I/Q and FM demod recording

           S  start scanner mode or exit hold mode
           C  start trunk control/rest channel following mode
           V  start trunk voice channel following mode

           ?  list active keys
         Esc  exit scanner/CC/VC modes or exit program
 

CanesFan95

Active Member
Joined
Feb 14, 2008
Messages
3,014
Location
FL
Oh crap, right there.

Say, what's the difference between "LNA, "mixer", and "VGA"? I seem to have a weird issue where I see a tall white spike on the spectrum and click on it but then there's no signal. Like there's fake signals if the gain is too high. Other times if I use the left and right arrow keys and slowly step through the band, I'll see more fake signals that move the wrong way.
 
Status
Not open for further replies.
Top