How do I clear all channels on the Pro-84

Status
Not open for further replies.

Smerri

Member
Joined
Sep 3, 2007
Messages
235
Location
Massachusetts
I snagged one today for $50.00 and the thing come pre-programmed with 190 channels I think.

I have searched with no luck. What is the command to clear all the stored frequencies so I can input my own?

Also, this won't effect the pre-programmed Air/Marine/WX Frequencies will it?
 

Smerri

Member
Joined
Sep 3, 2007
Messages
235
Location
Massachusetts
Disregard. Found it on the Pro-83 Yahoo group.

For anyone who is curious

TO RESET:
make sure the scanner is OFF
While holding down the 2,9 and hold, turn the scanner on.
After 3 seconds, the scanner will be reset and CLEAr appears.

To restore the original 150 preprogrammed frequencies stored in the
scanner, do the following.

make sure the scanner is OFF
While holding down the 3 and E, turn on the scanner.
After several seconds, the scanner restores the freqs. and -LoAd-
appears.

Source
 
Status
Not open for further replies.
Top