How do i program my Pro 106 to chesapeake

[Vagoodolboy]

I have tried a lot of times to program my pro 106 to pick up Chesapeake but i get no audio. I have tried programing it under PRO 25 Mot 800/900 Mot VHF/UHF nothing is working the idd come up but no sound? The Chesapeake system is
System Type: Motorola Type II SmartZone
System Voice: Analog and APCO-25 Common Air Interface

 

[teufler]

I believe it is a custom reband, so you can either flash your scanner I think, or you put in the custom reband table.

 

[Spitfire8520]

You need to program it as a MOT800/900 system, then you need to scroll all the way to the bottom until you see a menu that says T Tables:. Set it to Custom, then hit SEL/ENT to set up custom tables.

Set the tables as follows:

Table 01:
  Low Chan: 440
  Hi Chan: 559
  Offset: 440
  Base: 851.02500
  Step: 25.000 

Table 02
  Low Chan: 0
  High Chan: 719
  Offset: 0
  Base: 851.01250
  Step: 25.000

Save everything and it should work if you have all the control channels and talkgroups programmed in correctly