My apologies... I obviously read the OP in the wrong way and thought you wanted to import your list into the software to upload into the scanner... my bad!!!
The quickest way will be to remove the micro SD card from the radio and use a memory card reader on your PC;
- Do you have a memory card reader for your PC? and do you have an adapter (micro SD to SD)?
With your configuration loaded into iScan, select the "
Scanner/SD Card" menu item and then "
Copy Configuration To Scanner Memory/SD Card" , I think there are a couple of confirmation questions at this point, then the configuration is loaded to the card.
Place the memory card back into the scanner, turn it on and you should be good to go. Make sure you enable all your play lists that you want to hear in the general tab as part of the configuration.
If you don't have a memory card reader available, you can connect the scanner to the PC with the supplied USB cable. Make sure you installed the device drivers from your CD!! You can then go through the same menu options I listed above to write the information to the memory card. This method is a little slower and I believe it is easier to corrupt the memory card with this method.
Good Luck,
Keith