Howard County Testing

Status
Not open for further replies.

bear105

Member
Joined
Dec 19, 2002
Messages
357
Reaction score
0
I'm hearing technicians testing on TG00048. They are discussing low-power transmissions. Does this TG make sense for this system??
 

mlevin

Member
Joined
Jan 29, 2003
Messages
2,527
Reaction score
33
Location
Baltimore, MD
Back when they implemented the system I think the radio techs were using that ID for testing. I could be wrong and getting confused with something else though. Either way that's a valid ID, and as far as I know moto systems can have both the 6 digit IDs as well as IDs with lower values
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
25,908
Reaction score
2,596
Location
Bowie, Md.
mlevin said:
Back when they implemented the system I think the radio techs were using that ID for testing. I could be wrong and getting confused with something else though. Either way that's a valid ID, and as far as I know moto systems can have both the 6 digit IDs as well as IDs with lower values

Yep, in AA county that's often where the EMS folks respond; I think there's a similar usage in Baltimore county.
Besides, I think the MAXIMUM length of a talkgroup is 6 characters; so a talkgroup of 000048 is perfectly valid.

73s Mike
 

ericcarlson

Member
Database Admin
Joined
Dec 18, 2002
Messages
1,639
Reaction score
156
Location
Houston, Texas
Motorola talkgroups range from 16 to (2^16)-16 in increments of 16 using Uniden's weird method of including the status bit in the talkgroup ID.
There is a total of 4095 possible talkgroup IDs per system. The highest talkgroup ID is 65520 (decimal). In hexadecimal, ignoring the status bit, talkgroups range from 001 to FFF.

-Eric
 

baybum

Member
Joined
Jan 19, 2003
Messages
1,172
Reaction score
88
Location
Howard County
I saw 00048 pop up on Wednesday. No voice, just a carrier.
Bear, have you heard any voice yet?

Mike

Bear, I'm in E.C. too. PM me for specifics if interested.

Mike
 
Status
Not open for further replies.
Top