To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

HT1250 Alerting

Thread starter ptfd13
Start date Mar 13, 2009

Status: Not open for further replies.

ptfd13

Member

Mar 13, 2009

Hey I know I've seen this question before but could not find the thread where it was located. Firgive me for asking agagin.

I have two HT1250s one with version 05.09.06 and another with version 05.07.01. They are both set up the exact same way with the same codeplug. I have QCII set up and they both alert when the tones are set but the radio with version 05.09.06 won't alert until the second tone is completely finished while the radio with version 05.07.01 alerts the instant the second tone is set. The tones are a 1/3 second format. I know both radios are set the same so I have no idea what would be causing this unless it is the firmware version. Any help would be greatly appreciated. Thanks.