• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

HT1250 Refurb Kit

Status
Not open for further replies.

kvg911

Member
Joined
Jan 27, 2008
Messages
63
Location
Fair Lawn, NJ
Hey, I am planning on getting a HT1250 Refurb Kit.. I need help putting on the parts.. Here are the parts listed below. If anyone can help me and give me directions that would be great. I know how to use the screw driver to open up the radio but im not sure on how to take out the Housing and install it all.

Housing Including front display cover
PTT Bezel
PTT and Control Buttons
Front Rubber Keypad
Speaker mic connector cover
Speaker mic connector
Speaker mic flex connector escutheon
Internal speaker felt
Top escutheon
Channel Knob
Volume Knob
Knob seals
 

N1GTL

Member
Database Admin
Joined
Jun 14, 2005
Messages
903
Location
CT
If you want to send the radio and kit, I'll recase it if you pick up shipping.

Otherwise, the hardest part is getting the flex circuit out. It goes from the side mic connector into the radio and connects to the mic, speaker and circuit board. They are a bit flimsy and can tear. If you tear it, it is about $80 or so for a new one.

If you want to try, I will probably be recasing one in the next week or two and I may be able to make a video and post to YouTube or something.
 
Status
Not open for further replies.
Top