BCD436HP/BCD536HP: Hytera Tier 3. Problem

[SKA999]

Uniden 436HP in trunk mode can't find LCN. It only searches for Motorola systems. The problem has been known for a long time.
Should we expect a fix?
Why doesn't it work on Hayter's systems?

 

[Chris0516]

Uniden 436HP in trunk mode can't find LCN. It only searches for Motorola systems. The problem has been known for a long time.
Should we expect a fix?
Why doesn't it work on Hayter's systems?

Are you referring to Hytera systems'? If you are referring To Hytera, read this: Hytera - Wikipedia

 

[KevinC]

Are you referring to Hytera systems'? If you are referring To Hytera, read this: Hytera - Wikipedia

What does that have to do with the OP’s issue?

 

[Chris0516]

What does that have to do with the OP’s issue?

I had never heard of Hayter, yet. It almost looked like the OP meant Hytera. I was just asking to be sure.

 

[dmfalk]

I had never heard of Hayter, yet. It almost looked like the OP meant Hytera. I was just asking to be sure.

*Points to topic title* Says "Hytera", right there....

 

[Ubbe]

Uniden 436HP in trunk mode can't find LCN. It only searches for Motorola systems. The problem has been known for a long time.
Should we expect a fix?
Why doesn't it work on Hayter's systems?

I had a Hytera DT3 system some 5-6 years ago with several sites that worked fine to track but I can't remember if I actually used the LCN finder on them. I probably just used the LCN calculator from @thewraith2008 to get the LCN's after getting the LCN/LSN number of other sites control channels from DSDplus.

What's happening, it never finds any LCN's even when there are conversations on those channels on that site you have chosen?

/Ubbe

 

[sonm10]

I asked a similar question last year, and here's the response from another member. There is a link to another thread in one of the posts. It seems as setting LCN to 0 is a work around.

Best method to monitor XPT

Hello all, Was wondering the best method to monitor this system Treasure Island Resort & Casino Trunking System, Red Wing, Minnesota I know from reading on the forums here that XPT is very difficult to track. What are you all using? I would prefer SDS200 because of the recording capability, but...

forums.radioreference.com

 

[Ubbe]

In those other links people are trying to scan trunked systems using conventional digital scanning. You can't do that as the scanning will stop on the periodic beacon signal or the constant control channel data and you'll have to use OFT system type and program all frequencies there to have it ignore the control channel data. But it will of course not trunk track if not using the MotoTRBO system type, that needs LCN's.

/Ubbe