• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

I need Help!!!! Replacement board for BC92XLT

Status
Not open for further replies.

trainman111

Member
Premium Subscriber
Joined
Sep 23, 2005
Messages
1,022
Location
Henrico, VA
I need help! I was attempting to put a discriminator ouput on my BC92XLT scanner. I hooked everything up and I thought everything was going good. I turned the scanner on, it wouldn't scan in scan mode. I opened the squelch wide open and the annoying noise didn't come through the speakers. The key beeps and the on/off alert works but nothing else. upon investigation, I noticed that the little black piece to the upper left of LND7 on the circuit board is missing. Does ANYONE have the top board for the scanner if they aren't using it? I REALLY need this piece. If anyone can help in anyway, PLEASE HELP ME.

Thank you very much,
Nick
 
Status
Not open for further replies.
Top