IC-2200h tuning step

Status
Not open for further replies.

tallen74

Member
Joined
Jun 1, 2006
Messages
40
Location
Beebe, AR
Will my 2200h receive frequencies out to 4 decimal places, (i.e. 155.1825).

If so can you explain how. I know how to change the tuning steps but I can't seem to get it to take.

Thanks
 

kayn1n32008

Member
Joined
Sep 20, 2008
Messages
5,641
Location
In the \'patch
Will my 2200h receive frequencies out to 4 decimal places, (i.e. 155.1825).

If so can you explain how. I know how to change the tuning steps but I can't seem to get it to take.

Thanks
In the set mode go to step menu and change it to 12.5 and save and exit from set mode
 

kpoe_28

Member
Joined
Oct 1, 2004
Messages
181
Location
Kennett Missouri
Will my 2200h receive frequencies out to 4 decimal places, (i.e. 155.1825).

If so can you explain how. I know how to change the tuning steps but I can't seem to get it to take.

Thanks
I have the 2200h EXP model (not USA model), Mine will using the programming software.
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,479
Location
NJ USA (Republic of NJ)
In the set mode go to step menu and change it to 12.5 and save and exit from set mode
That is not gonna do it for him. This freq he is trying to enter is on a new 7.5 Khz channel boundary
and not many of the ham rigs today will do this. Some portions of the vhf hi band have a new 7.5 Khz
channel step and japan has not figured that one out yet.
 
Status
Not open for further replies.
Top