• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Icom IC-F121 & IC-F9511T

Status
Not open for further replies.

Mahog5

Newbie
Joined
Dec 20, 2016
Messages
1
Hi All,

Looking to find out where I can purchase the programing cable for the Icom IC-F121 & IC-F9511T. I am in Canada and would prefer to order from a Canadian supplier if possible.

Also curious on programing software.. Is this software available online? and if so can someone point me in the right direction.

Cheers,
 

BC_Scan

Member
Joined
Aug 26, 2006
Messages
380
Location
Vancouver BC
Icom is the only source for that (OPC- cable) over priced cable (or alternatively e-bay)
the software while possibly on the net will be two different versions,
If I were you I would make a freq list, along with a IC license for said freq and take it to authorized Icom dealer,and have them program, many in each province,
1st radio is a trunking radio, and unless you have express right to be on a radio shops trunk you could cause a problem,
Icom policy in the west is not to sell software to indivduals, not sure about in Toronto (that is what I have been told)
 
Status
Not open for further replies.
Top